NSN 5305-01-264-1476
High Torque Screw
Between 1.584 inches and 1.614 inches fastener length, flat countersunk head style, between 0.826 inches and 0.888 inches head diameter, grip diameter: between 0.4365 inches and 0.4370 inches .
Manufacturer part number LD111-0044-0716 for national stock number 5305012641476.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-264-1476.
-
MPN or Model
LD111-0044-0716
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.574 inches and 0.624 inches -
Fastener Length
Between 1.584 inches and 1.614 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.826 inches and 0.888 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-056-5451 MPN BACB30LK3-8Close Tolerance Screw
- 5305-01-464-4371 MPN VCL0009-3-8Close Tolerance Screw
- 5305-01-512-8353 MPN 3M1170D3-6AFClose Tolerance Screw
- 5306-00-151-8678 MPN VAL22034-928Shear Bolt
- 5306-00-708-7672 MPN VAL21013-12040Shear Bolt
- 5306-00-900-5282 MPN MS21250-05066Shear Bolt
- 5306-01-054-3404 MPN VCG0009L6-11Shear Bolt
- 5306-01-055-7734 MPN VCG0009-12-73Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-264-1476 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-0716 | Boeing Company, The |
LD111-0044-0716 | Valley-todeco, Inc. |
LD111-0044-0716 | J.w. Manufacturing, Inc |
LD111-0044-0716 | Sps Technologies, Llc |
LD111-0044-0716 | Sps Technologies, Llc |
LD111-0044-0716 | Arconic Global Fasteners & Rings, |
LD111-0044-0716 | Huck International, Inc. |
LD111-0044-0716 | Sps Technologies, Llc |
LD111-0044-0716 | Sps Technologies, Llc |
LD111-0044-0716 | Sonic Industries Inc. |
LD111-0044-0716 | Hi-shear Corporation |
LD111-0044-0716 | Lisi Aerospace Canada Corp |
LD111-0029-0716 | Boeing Company, The |