NSN 5305-01-264-1478
High Torque Screw
Between 1.834 inches and 1.864 inches fastener length, flat countersunk head style, between 0.826 inches and 0.888 inches head diameter, grip diameter: between 0.436 inches and 0.437 inches .
Manufacturer part number LD111-0029-0720 for national stock number 5305012641478.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-264-1478.
-
MPN or Model
LD111-0029-0720
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.584 inches and 0.614 inches -
Fastener Length
Between 1.834 inches and 1.864 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.826 inches and 0.888 inches -
Grip Diameter
Between 0.436 inches and 0.437 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
1.250 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2723 MPN LS15262V08-10Machine Screw
- 5305-01-512-8325 MPN 3M1170C5-14AFClose Tolerance Screw
- 5305-01-521-8956 MPN ST3M557-5-16Close Tolerance Screw
- 5306-00-420-8245 MPN STSBG002A06U024Shear Bolt
- 5306-00-434-4643 MPN GB511H-4-17Shear Bolt
- 5306-00-839-1871 MPN VFK100G-10030Shear Bolt
- 5306-01-012-0624 MPN VAL23001-4D030Shear Bolt
- 5306-01-045-9535 MPN VAL23608-3-3Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-264-1478 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0029-0720 | Boeing Company, The |
LD111-0044-0720 | Boeing Company, The |
LD111-0044-0720 | Sps Technologies, Llc |
LD111-0044-0720 | Valley-todeco, Inc. |
LD111-0044-0720 | Arconic Global Fasteners & Rings, |
LD111-0044-0720 | Sps Technologies, Llc |
LD111-0044-0720 | Sps Technologies, Llc |
LD111-0044-0720 | Sonic Industries Inc. |
LD111-0044-0720 | Hi-shear Corporation |
LD111-0044-0720 | Sps Technologies, Llc |
LD111-0044-0720 | Alcoa Global Fasteners, Inc. |
LD111-0044-0720 | Lisi Aerospace Canada Corp |