NSN 5305-01-265-4912
High Torque Screw
Between 0.823 inches and 0.853 inches fastener length, oval countersunk head style, between 0.297 inches and 0.302 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number AIC4040-3-08R for national stock number 5305012654912.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-265-4912.
-
MPN or Model
AIC4040-3-08R
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.323 inches and 0.353 inches -
Fastener Length
Between 0.823 inches and 0.853 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.297 inches and 0.302 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.190 inches -
Grip Length
0.500 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-487-5277 MPN AIC1023H4-9Close Tolerance Screw
- 5305-00-508-2718 MPN AIC551C3-708Shoulder Screw
- 5305-01-054-6272 MPN AIC985-4-9Close Tolerance Screw
- 5305-01-105-1142 MPN HT4057-3-3AClose Tolerance Screw
- 5305-01-158-6762 MPN AIC940-3-8Machine Screw
- 5305-01-212-1987 MPN BACB30LU4P7Close Tolerance Screw
- 5305-01-290-4868 MPN AIC985-5-5Close Tolerance Screw
- 5305-01-330-3394 MPN AIC1658-4-10Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-265-4912 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC4040-3-08R | Sps Technologies, Llc |
LE111-0035-2308 | Boeing Company, The |
LE111-0035-2308 | Sps Technologies, Llc |
LE111-0035-2308 | Arconic Global Fasteners & Rings, |
A175-2308 | Huck International, Inc. |
LE111-0035-2308 | Sps Technologies, Llc |
LE111-0035-2308 | Sonic Industries Inc. |
LE111-0035-2308 | Sps Technologies, Llc |
LE111-0035-2308 | Molex Incorporated |
A175-2308 | Huck Intl Inc |
LE111-0035-2308 | Molex Incorporated |