NSN 5305-01-265-6391
High Torque Screw
Internal drive ribbed.
Manufacturer part number HR204JK-5-6 for national stock number 5305012656391.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-265-6391.
-
MPN or Model
HR204JK-5-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.454 inches and 0.521 inches -
Fastener Length
Between 0.839 inches and 0.886 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.634 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5873 MPN BACB30LU4D17Machine Screw
- 5305-01-045-2467 MPN 51B223-64Close Tolerance Screw
- 5305-01-045-4298 MPN HT4016-3-6YShoulder Screw
- 5305-01-104-1467 MPN CHT4057-4-7Close Tolerance Screw
- 5305-01-207-7509 MPN SC2176R-08-15Machine Screw
- 5305-01-381-5723 MPN SC3102-4-39Close Tolerance Screw
- 5305-01-435-6493 MPN BACB30LU9-25Close Tolerance Screw
- 5305-01-502-6845 MPN TX1027C4D15AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-265-6391 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HR204JK-5-6 | Hi-shear Corporation |
106706T-5-6 | Sps Technologies, Llc |
GB510CE5-6 | Northrop Grumman Systems Corporation |
PBF1202-5-6 | Sps Technologies, Llc |
SC1779-5-6 | Arconic Global Fasteners & Rings, |
HR204-5-6 | Hi-shear Corporation |
106706T-5-6 | Sps Technologies, Llc |
GB510CE5-6 | Northrop Grumman Systems Corporation |
SC1779-5-6 | Arconic Global Fasteners & Rings, |
HR204-5-6 | Hi-shear Corporation |
PBF1202-5-6 | Sps Technologies, Llc |