NSN 5305-01-266-7322
Bolt Stove
Between 0.157 inches and 0.188 inches fastener length, flat countersunk head style, between 0.322 inches and 0.385 inches head diameter, internal drive style: torque set.
Manufacturer part number A1102S08-3 for national stock number 5305012667322.
Datasheet
-
Product description
Machine Screw NSN 5305-01-266-7322.
-
MPN or Model
A1102S08-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.022 inches and 0.073 inches -
Fastener Length
Between 0.157 inches and 0.188 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.322 inches and 0.385 inches -
Internal Drive Style
Torque set -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
Between 36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp e4340 or steel comp 4140 or steel comp 8735 or steel comp 8740 or steel comp 6150 -
Screw Surface Treatment
Cadmium and chromate -
Screw Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5305-00-431-7334 MPN NAS1102-04-24Machine Screw
- 5305-00-469-3627 MPN AIC4534-1Shoulder Screw
- 5305-00-823-5808 MPN NAS1102-06-12Machine Screw
- 5305-01-004-9495 MPN AIC812-02-10Machine Screw
- 5305-01-056-1513 MPN BACB30LU4-35Close Tolerance Screw
- 5305-01-159-4487 MPN AIC944-4-14Machine Screw
- 5305-01-164-1626 MPN BACB30LU12-54Close Tolerance Screw
- 5305-01-363-8844 MPN 3D0150-3-5Close Tolerance Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-266-7322 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
A1102S08-3 | Sps Technologies, Llc |