NSN 5305-01-266-7799
High Torque Screw
Between 1.236 inches and 1.266 inches fastener length, flat countersunk head style, between 0.447 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number AIC984BL4-12 for national stock number 5305012667799.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-266-7799.
-
MPN or Model
AIC984BL4-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.476 inches and 0.526 inches -
Fastener Length
Between 1.236 inches and 1.266 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.447 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Mil-c-83488 type 2 class 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-390-0586 MPN NAS1101E4-8Machine Screw
- 5305-00-901-6300 MPN NAS1101-06H5Machine Screw
- 5305-00-915-2597 MPN AIC1023H5-26Machine Screw
- 5305-01-217-4009 MPN AIC4040-3-23RClose Tolerance Screw
- 5305-01-396-5233 MPN AIC618-3-10Close Tolerance Screw
- 5305-01-417-2490 MPN 3M1169V-3-14Close Tolerance Screw
- 5305-01-435-3897 MPN BACB30LU7-45Close Tolerance Screw
- 5305-01-465-2415 MPN TX1026V4-14AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-266-7799 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC984BL4-12 | Sps Technologies, Llc |
C7984BL4-12 | Arconic Global Fasteners & Rings, |
C7984BL4-12 | Huck International, Inc. |
C7984BL4-12 | Alcoa Global Fasteners, Inc. |
C7984BL4-12 | Lockheed Martin Corporation |
PBF1165-L4-12 | Sps Technologies, Llc |
121557L4A12B | Sps Technologies, Llc |
121557L4A12B | Sps Technologies, Llc |
121557L4A12 | Sps Technologies, Llc |
121557L4A12 | Sps Technologies, Llc |