NSN 5305-01-266-8321
Bolt Stove
Between 2.532 inches and 2.579 inches fastener length, pan head style, between 0.594 inches and 0.615 inches head diameter, head height: between 0.203 inches and 0.218 inches .
Manufacturer part number MS27039-5-40 for national stock number 5305012668321.
Datasheet
-
Product description
Machine Screw NSN 5305-01-266-8321.
-
MPN or Model
MS27039-5-40
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.548 inches and 0.625 inches -
Fastener Length
Between 2.532 inches and 2.579 inches -
Head Style
Pan -
Head Diameter
Between 0.594 inches and 0.615 inches -
Head Height
Between 0.203 inches and 0.218 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
Between 26.0 rockwell c and 32.0 rockwell c -
Screw Material
Steel comp 4037 or steel comp 8630 -
Screw Material Specification
Mil-s-8695 military specification 1st material response or mil-s-6050 military specification 2nd material response -
Screw Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-425-6507 MPN NAS1063A5-441Terminal Board Marker Strip
- 5940-01-455-2467 MPN NAS1063A3-539BTerminal Board Marker Strip
- 1560-01-628-0450 MPN 9-66093Aircraft Channel
- 5935-00-111-1890 MPN NAS1665-10Electrical Connector Backshell
- 5305-00-007-2951 MPN NAS1100C01-7Machine Screw
- 5305-00-007-9895 MPN NAS1102E04-12PMachine Screw
- 5305-00-008-2062 MPN NAS1509-21Close Tolerance Screw
- 5305-00-008-5845 MPN NAS1632CE7Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-266-8321 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27039-5-40 | National Aerospace Standards |
MS27039-5-40 | Military Standards |