NSN 5305-01-266-8380
High Torque Screw
Between 1.378 inches and 1.408 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number LD111-0044-2317 for national stock number 5305012668380.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-266-8380.
-
MPN or Model
LD111-0044-2317
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.306 inches and 0.356 inches -
Fastener Length
Between 1.378 inches and 1.408 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.190 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-512-8368 MPN 3M1170D4-4AClose Tolerance Screw
- 5305-01-513-8893 MPN VCL0010-6-14Close Tolerance Screw
- 5306-00-062-4254 MPN 3M33-4-2Shear Bolt
- 5306-00-205-3700 MPN BACB30NE6-18Close Tolerance Bolt
- 5306-00-492-6995 MPN VAL23002-5D016Shear Bolt
- 5306-01-045-5558 MPN VAL23608-4-25Shoulder Bolt
- 5306-01-054-3424 MPN C7521L6-9Shear Bolt
- 5306-01-061-8344 MPN VCB0008A4-2-125Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-266-8380 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-2317 | Boeing Company, The |
LD111-0044-2317 | Valley-todeco, Inc. |
LD111-0044-2317 | Sps Technologies, Llc |
LD111-0044-2317 | Sps Technologies, Llc |
LD111-0044-2317 | Sonic Industries Inc. |
LD111-0044-2317 | Sps Technologies, Llc |
LD111-0044-2317 | Hi-shear Corporation |
LD111-0044-2317 | Sps Technologies, Llc |