NSN 5305-01-266-8397
High Torque Screw
Between 1.011 inches and 1.041 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.3145 inches and 0.3147 inches .
Manufacturer part number HT4054-3-11A for national stock number 5305012668397.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-266-8397.
-
MPN or Model
HT4054-3-11A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.313 inches and 0.363 inches -
Fastener Length
Between 1.011 inches and 1.041 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.3145 inches and 0.3147 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049 military specification single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-050-9001 MPN C7984-3-9Close Tolerance Screw
- 5305-01-284-7157 MPN VT1694F5-23Close Tolerance Screw
- 5305-01-372-2326 MPN HT4068-6-8YClose Tolerance Screw
- 5305-01-431-9978 MPN SC2174V3-22HClose Tolerance Screw
- 5305-01-435-3891 MPN BACB30LU7-43Close Tolerance Screw
- 5305-01-435-6493 MPN BACB30LU9-25Close Tolerance Screw
- 5305-01-567-7889 MPN HT4008-6-21Shoulder Screw
- 5306-00-808-1306 MPN 51B464-3A7Machine Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-266-8397 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4054-3-11A | Huck International, Inc. |
HT4054-3-11A | Arconic Global Fasteners & Rings, |
ST3M730-31 | Fastener Innovation Technology, Inc. |
WC4054-3-11A | West Coast Aerospace Inc |
HT4054-3-11A | Hi-shear Corporation |
HT4054-3-11A | Sps Technologies, Llc |
HT4054-3-11A | Lisi Aerospace Canada Corp |
ST3M730-3L11 | Boeing Company, The |
HT4054-3-11A | Sps Technologies Inc |
HT4054-3-11A | Huck Intl Inc |
HTH054-3-11A | Sps Technologies, Llc |
HT4054-3-11A | Alcoa Global Fasteners, Inc. |