NSN 5305-01-266-9361
High Torque Screw
Between 0.583 inches and 0.613 inches fastener length, flat countersunk head style, between 0.339 inches and 0.341 inches head diameter, grip diameter: between 0.1085 inches and 0.1095 inches .
Manufacturer part number HT4064-3-5 for national stock number 5305012669361.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-266-9361.
-
MPN or Model
HT4064-3-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.261 inches and 0.311 inches -
Fastener Length
Between 0.583 inches and 0.613 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.341 inches -
Grip Diameter
Between 0.1085 inches and 0.1095 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 8740 or steel comp 4340 -
Material Specification
Mil-s-6049 military specification 1st material response or mil-s-5000 military specification 2nd material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Ps13143 cl 3 type 2 cagec 85277 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2825 MPN LS15267V3-25Machine Screw
- 5305-00-541-9344 MPN HT4025L4D14Close Tolerance Screw
- 5305-01-062-1057 MPN BACB30RF6P10Close Tolerance Screw
- 5305-01-104-1067 MPN HT4068-4-6AClose Tolerance Screw
- 5305-01-216-5203 MPN HT4075V4-9-22Close Tolerance Screw
- 5305-01-218-1451 MPN HT4060V5-4ASShoulder Screw
- 5305-01-386-0479 MPN SC3103-3-15Close Tolerance Screw
- 5305-01-406-3075 MPN HT4067-3-11AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-266-9361 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4064-3-5 | Arconic Global Fasteners & Rings, |
HT4064-3-5 | Huck International, Inc. |
HT4064-3-5 | Hi-shear Corporation |
3MA1503-3-5 | Boeing Company, The |
HT4064-3-5 | Sps Technologies, Llc |
HT4064-3-5 | Lisi Aerospace Canada Corp |
HT4064-3-5 | Huck Intl Inc |
HT4064-3-5 | Alcoa Global Fasteners, Inc. |
HT4064-3-5 | Boeing Company, The |