NSN 5305-01-268-1207
High Torque Screw
Between 1.063 inches and 1.093 inches fastener length, flat countersunk head style, between 0.513 inches and 0.566 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number NAS1996-8T for national stock number 5305012681207.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-268-1207.
-
MPN or Model
NAS1996-8T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.553 inches and 0.603 inches -
Fastener Length
Between 1.063 inches and 1.093 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.513 inches and 0.566 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
63.0 microinches bearing surface of head -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1996 professional/industrial association standard
More from these suppliers
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5305-00-045-3182 MPN MS24694-S99Machine Screw
- 5305-00-104-5072 MPN NAS1352-02LE8PSocket Head Cap Screw
- 5305-00-141-7147 MPN NAS1191-4P6Socket Head Cap Screw
- 5305-00-144-8365 MPN NAS1218-08-17PMachine Screw
- 5305-00-255-5527 MPN NAS1101-06-12Machine Screw
- 5305-00-450-5979 MPN NAS1101-3H54Machine Screw
- 5305-00-456-0001 MPN MS21295-13Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-268-1207 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1996-8T | National Aerospace Standards |
NAS1996-8T | National Aerospace Standards |
NAS1996-8T | National Aerospace Standards |
NAS1996-8T | National Aerospace Standards |
NAS1996-8T | National Aerospace Standards |
NAS1996-8T | National Aerospace Standards |
NAS1996-8T | National Aerospace Standards |