NSN 5305-01-268-5562
High Torque Screw
Between 0.660 inches and 0.690 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number H185-3D5 for national stock number 5305012685562.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-268-5562.
-
MPN or Model
H185-3D5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.276 inches and 0.388 inches -
Fastener Length
Between 0.660 inches and 0.690 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.520 inches first hole and 0.550 inches first hole -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-268-2047 MPN 12S128-7Aircraft Structural Component Support
- 5305-00-150-3366 MPN AIC4533-6-2Shoulder Screw
- 5305-00-364-7307 MPN LS15267V3-16Machine Screw
- 5305-00-916-4842 MPN AIC82-4-15Machine Screw
- 5305-01-190-2186 MPN A1C940-4-7Machine Screw
- 5305-01-196-5092 MPN LE111-0038-2407Close Tolerance Screw
- 5305-01-334-7367 MPN LD111-0044-2311Close Tolerance Screw
- 5305-01-435-5961 MPN BACB30LU7-53Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-268-5562 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
H185-3D5 | Huck International, Inc. |
AIC985-3D-5 | Sps Technologies, Llc |
PBF1166-3D5 | Sps Technologies, Llc |
121558-3-5P | Sps Technologies, Llc |
VT1694F3-5D | Alcoa Global Fasteners, Inc. |
C7985-3D5 | Lockheed Martin Corporation |
C7985-3D5 | Arconic Global Fasteners & Rings, |
C7985-3D5 | Sps Technologies, Llc |
H185-3D5 | Huck Intl Inc |