NSN 5305-01-269-1491
High Torque Screw
Between 0.723 inches and 0.753 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number H185-3D6 for national stock number 5305012691491.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-269-1491.
-
MPN or Model
H185-3D6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.276 inches and 0.388 inches -
Fastener Length
Between 0.723 inches and 0.753 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.583 inches first hole and 0.613 inches first hole -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-526-0474 MPN 15265V06-2Close Tolerance Screw
- 5305-00-840-5962 MPN A1C617-1Externally Relieved Body Screw
- 5305-01-012-2012 MPN A1C812-04-12Machine Screw
- 5305-01-038-4764 MPN AIC811-5-38Socket Head Cap Screw
- 5305-01-050-4200 MPN BACB30LR4U17Close Tolerance Screw
- 5305-01-259-7002 MPN AIC984-3-4RClose Tolerance Screw
- 5305-01-261-1894 MPN 51B334-8YClose Tolerance Screw
- 5305-01-357-4612 MPN AIC939-3-8PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-269-1491 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
H185-3D6 | Huck International, Inc. |
VT1694F3-6D | Arconic Global Fasteners & Rings, |
AIC985-3D6 | Sps Technologies, Llc |
PBF1166-3D6 | Sps Technologies, Llc |
121558-3-6P | Sps Technologies, Llc |
C7985-3D6 | Lockheed Martin Corporation |
PBF1166-3D6 | Huck International, Inc. |
H185-3D6 | Huck Intl Inc |