NSN 5305-01-270-0074
High Torque Screw
Two keyways along threads 180 deg apart; width of keyways 0.044 in. Min. And 0.054 in. Max.
Manufacturer part number K86S0249-3 for national stock number 5305012700074.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-270-0074.
-
MPN or Model
K86S0249-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Fastener Length
Between 0.677 inches and 0.697 inches -
Head Style
Pan -
Head Diameter
Between 0.357 inches and 0.375 inches -
Head Height
Between 0.121 inches and 0.133 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.084 inches and 0.104 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Steel comp 302 or steel comp 304 or steel comp 304l or steel comp 305 or steel comp 309 or steel comp 310 or steel comp 316 or steel comp 316l or steel comp 317 or steel comp 321 or steel comp 322 or steel comp 324 or steel comp 347 -
Material Specification
Qq-s-763 federal specification all material responses -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-943-4123 MPN G33CB16S26N2C0nnect0r
- 5935-01-356-1375 MPN K15K0014-S12F3Electrical Connector Backshell
- 5985-01-422-2506 MPN A06G3428-1Electrical Dummy Load
- 5930-01-065-0890 MPN B80F0076-1Switch Assembly
- 5935-01-043-6938 MPN 401-4774758PCADElectrical Receptacle Connector
- 5305-01-021-9159 MPN CA2658-5-18Close Tolerance Screw
- 5305-01-537-4345 MPN CA21369-6-14RSClose Tolerance Screw
- 5306-01-398-9476 MPN SS27576-3-16Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-270-0074 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
K86S0249-3 | Mcdonnell Douglas Corp |
CA21062-10-3-11 | Arconic Global Fasteners & Rings, |
K86S0249-3 | The Boeing Company |
Stock Check
- NS: 2
- NE: 49