NSN 5305-01-270-0075
High Torque Screw
Between 0.923 inches and 0.953 inches fastener length, flat countersunk head style, between 0.429 inches and 0.479 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number C20645B5-7 for national stock number 5305012700075.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-270-0075.
-
MPN or Model
C20645B5-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.475 inches and 0.525 inches -
Fastener Length
Between 0.923 inches and 0.953 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.429 inches and 0.479 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Mil-c-83488 type 2 class 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-054-6669 MPN SK2015-530Machine Screw
- 5305-00-225-4566 MPN GS551C04-204Machine Screw
- 5305-00-505-2825 MPN LS15267V3-25Machine Screw
- 5305-00-518-5287 MPN LS15262V06-10Machine Screw
- 5305-00-803-9577 MPN 51B222-7Machine Screw
- 5305-00-920-0342 MPN AIC811-6-27Socket Head Cap Screw
- 5305-01-017-2560 MPN R1057P7LMachine Screw
- 5305-01-054-4624 MPN AIC9535-7-21Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-270-0075 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C20645B5-7 | Sps Technologies, Llc |
AIC618B5-7 | Sps Technologies, Llc |
GS1009B5-7 | B & B Specialties Inc. |
93926B5-7 | Sps Technologies, Llc |
93926B5-7 | Sps Technologies, Llc |
C20645B5-7 | Lockheed Martin Corporation |
H185B5-7 | Huck Intl Inc |
H185B5-7 | Huck International, Inc. |
PBF1166B5-7 | Sps Technologies, Llc |
AIC985B5-7 | Sps Technologies, Llc |
VT1694B5-7 | Arconic Global Fasteners & Rings, |
121558B5-A-7 | Sps Technologies, Llc |
C7985B5-7 | Lockheed Martin Corporation |
VT1694B5-7 | Alcoa Global Fasteners, Inc. |
Stock Check
- NS: 4
- NE: 2739