1-321-802-5889
Email Us

NSN 5305-01-270-3054

High Torque Screw

About this product

Between 0.826 inches and 0.856 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .

Manufacturer part number AIC985B3-7 for national stock number 5305012703054.

Datasheet

  • Product description

    Close Tolerance Screw NSN 5305-01-270-3054.

  • MPN or Model

    AIC985B3-7

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Unit Weight (Est.)
    0.1 lb
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.378 inches and 0.428 inches
  • Fastener Length
    Between 0.826 inches and 0.856 inches
  • Head Style
    Flat countersunk
  • Head Diameter
    Between 0.258 inches and 0.305 inches
  • Grip Diameter
    Between 0.1885 inches and 0.1895 inches
  • Internal Drive Style
    Offset cruciform (torque set)
  • Thread Diameter
    0.190 inches
  • Grip Length
    Between 0.428 inches and 0.448 inches
  • Features Provided
    Dry film lubricant
  • Thready Qty Per Inch (tpi)
    32
  • Min. Tensile Strength (psi)
    220000 pounds per square inch
  • Hardness Rating
    46.0 rockwell c and 50.0 rockwell c
  • Countersink Angle
    Between 99.0 degrees and 101.0 degrees
  • Surface Finish
    32.0 microinches threads
  • Material
    Steel comp h11
  • Material Specification
    Ams 6487 assn standard single material response
  • Surface Treatment
    Aluminum and chromate
  • Surface Treatment Specification
    Mil-c-83488 type 2 cl 3 military specification single treatment response
  • Thread Series Designator
    Unjf
More from these suppliers
Close Tolerance Screw

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Mechanic Bill explains High Torque Screw

Pricing and Availability

Get a quote for 5305-01-270-3054 close tolerance screw
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5305012703054

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
AIC985B3-7 Sps Technologies, Llc
C7985B3-7 Lockheed Martin Corporation
H185B3-7 Huck International, Inc.
VT1694W3-7 Arconic Global Fasteners & Rings,
PBF1166B3-7 Sps Technologies, Llc
VT1694W3-7 Alcoa Global Fasteners, Inc.
121558-3-A7B Sps Technologies, Llc
SF117B3-7 Saturn Fasteners Inc
H185B3-7 Huck Intl Inc
Stock Check
Availability for this item was last checked on 03/13/24. The quantities and conditions available at the time were:
  • NS: 337
  • NE: 1481