NSN 5305-01-270-5444
Bolt Stove
Between 0.594 inches and 0.625 inches fastener length, flat countersunk head style, between 0.150 inches and 0.172 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN505C2R10 for national stock number 5305012705444.
Datasheet
-
Product description
Machine Screw NSN 5305-01-270-5444.
-
MPN or Model
AN505C2R10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.589 inches -
Fastener Length
Between 0.594 inches and 0.625 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.150 inches and 0.172 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.086 inches -
Thready Qty Per Inch (tpi)
56 -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel comp 403 or steel comp 303 or steel comp 303se -
Screw Material Specification
Astm a582 assn standard 1st material response or mil-s-7720 military specification 2nd material response -
Screw Surface Treatment
Plastic -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-236-8209 MPN AN3106B14S9SElectrical Plug Connector
- 5935-00-241-0252 MPN AN3106B14S2PElectrical Plug Connector
- 5935-00-241-0616 MPN AN3102A28-12PWElectrical Receptacle Connector
- 4820-00-541-2298 MPN AN6278-4Shuttle Valve
- 5935-00-189-1504 MPN AN3101A14S1PElectrical Plug Connector
- 5305-00-150-9464 MPN AN502-8-14Machine Screw
- 5305-00-150-9695 MPN AN501A6-6Machine Screw
- 5305-00-150-9703 MPN AN501A416-7Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-270-5444 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN505C2R10 | Aeronautical Standards Group |