NSN 5305-01-270-8504
Adjustment Screw Valve
About this product
Between 0.480 inches and 0.500 inches fastener length, flat chamfer head style, between 0.550 inches and 0.562 inches head diameter, head height: between 0.368 inches and 0.375 inches .
Manufacturer part number 9116M77P01 for national stock number 5305012708504.
Datasheet
-
Product description
Setscrew NSN 5305-01-270-8504.
-
MPN or Model
9116M77P01
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.355 inches and 0.500 inches -
Fastener Length
Between 0.480 inches and 0.500 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.550 inches and 0.562 inches -
Head Height
Between 0.368 inches and 0.375 inches -
Locking Feature
Patch threads -
Point Style
Flat -
Internal Drive Style
Hexagon -
Thread Diameter
0.375 inches -
Width Across Flats
Between 0.312 inches and 0.316 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
170000 pounds per square inch -
Hardness Rating
38.0 rockwell c and 45.0 rockwell c -
Minimum Yield Strength
150000 pounds per square inch -
Material
Steel fastener -
Material Specification
Ff-s-86 federal specification single material response fastener -
Thread Series Designator
Unc
More from these suppliers
- 4920-00-698-7108 MPN 1C2601-11Aircraft Engine Maintenance Fixture
- 4920-00-908-1225 MPN 1C5040G2Oil Filtration Unit
- 5905-00-958-0944 MPN R995P9000AInductive Wire Wound Fixed Resistor
- 5905-00-959-8989 MPN R984Inductive Wire Wound Fixed Resistor
- 5905-01-081-3610 MPN J165P0200AInductive Wire Wound Fixed Resistor
- 5905-01-097-1620 MPN J115P0020AInductive Wire Wound Fixed Resistor
- 4920-01-131-1045 MPN 21C5865G01Aircraft Maintenance Fixture
- 4920-01-147-4534 MPN 856A1061G03Aircraft Maintenance Fixture
Setscrew
An externally threaded device whose threaded portion is of one nominal diameter with or without a head and having a cup, cone, or other type of machined point designed to prevent or restrict relative movement of parts and designed to be driven with either a wrench or inserted driver. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-270-8504 setscrewManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
9116M77P01 | General Electric Company |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.