NSN 5305-01-270-8513
High Torque Screw
Between 0.826 inches and 0.856 inches fastener length, flat countersunk head style, between 0.350 inches and 0.399 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number AIC985B4-7 for national stock number 5305012708513.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-270-8513.
-
MPN or Model
AIC985B4-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.378 inches and 0.428 inches -
Fastener Length
Between 0.826 inches and 0.856 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.350 inches and 0.399 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Features Provided
Dry film lubricant -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Aluminum and chromate -
Surface Treatment Specification
Mil-c-83488 type 2 cl 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-224-0566 MPN NAS1102-08-58Machine Screw
- 5305-00-510-5285 MPN 15263V3-10Machine Screw
- 5305-01-045-2905 MPN BACB30LU5-22Close Tolerance Screw
- 5305-01-054-6287 MPN AIC984-4-10Close Tolerance Screw
- 5305-01-418-2002 MPN AIC4463-08-6Machine Screw
- 5305-01-434-3883 MPN AIC 994Close Tolerance Screw
- 5305-01-481-0079 MPN TX1026D4-32AClose Tolerance Screw
- 5305-01-627-4663 MPN JSFB34V4-7Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-270-8513 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC985B4-7 | Sps Technologies, Llc |
C7985B4-7 | Lockheed Martin Corporation |
VT1694AS4-10 | Arconic Global Fasteners & Rings, |
H185B4-7 | Huck International, Inc. |
121558-4-A7B | Sps Technologies, Llc |
VT1694AS4-10 | Alcoa Global Fasteners, Inc. |
PBF1166B4-7 | Sps Technologies, Llc |
121558-4-A7B | Sps Technologies, Llc |
H185B4-7 | Huck Intl Inc |
VT1694W4-7 | Arconic Global Fasteners & Rings, |
VT1694W4-7 | Alcoa Global Fasteners, Inc. |