NSN 5305-01-270-8515
High Torque Screw
Chamfer dog point at threaded end; two keyways along threads 180 degress apart.
Manufacturer part number FT1559-8 for national stock number 5305012708515.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-270-8515.
-
MPN or Model
FT1559-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.286 inches and 0.336 inches -
Fastener Length
Between 0.490 inches and 0.510 inches -
Head Style
Hexagon -
Head Height
Between 0.104 inches and 0.110 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Cross recess type ii -
Thread Diameter
0.164 inches -
Grip Length
Between 0.084 inches and 0.104 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Steel comp 630 -
Material Specification
Ams 5643 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Cps 130, cagec 04577 mfr ref single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 4820-01-151-2556 MPN 2370-0041-11Governor Assembly
- 1680-01-573-4556 MPN B47280-1 Regulator Solenoid
- 1680-01-608-3292 MPN B47917-3Shackle Anchor
- 4820-01-063-7211 MPN 2850-0097-1Valve Seat
- 4820-01-371-2738 MPN B15830-30REV C ITEM NO. 17Valve Stem Guide
- 5305-01-640-7118 MPN B48066-01Socket Head Cap Screw
- 5305-00-540-3103 MPN CA2658-6-11Close Tolerance Screw
- 5305-00-991-1330 MPN CA28080-4-16SShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-270-8515 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
FT1559-8 | Fastener Technology Corp. |
3601-0030-3 | Carleton Technologies Inc |
FT1559-8 | Arconic Global Fasteners & Rings, |