NSN 5305-01-271-6884
Panel Screw
Between 0.395 inches and 0.405 inches fastener length, flat countersunk head style, between 0.191 inches and 0.225 inches head diameter, first diameter from head: between 0.069 inches and 0.079 inches .
Manufacturer part number 77-081336-01 for national stock number 5305012716884.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-271-6884.
-
MPN or Model
77-081336-01
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.374 inches -
Fastener Length
Between 0.395 inches and 0.405 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.191 inches and 0.225 inches -
First Diameter From Head
Between 0.069 inches and 0.079 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.021 inches and 0.031 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 302 or steel comp 303 or steel comp 304 -
Material Specification
66 federal standard all material responses or sae assn standard all material responses or aisi assn standard all material responses -
Surface Treatment
Passivate -
Thread Series Designator
Unc
More from these suppliers
- 5930-00-968-0342 MPN 3235-72Rotary Switch
- 4920-01-098-8079 MPN 31-056765-01Electrical-electronic Test And Measuring Equipment Case
- 5985-01-120-7809 MPN 308939-26Fixed Attenuator
- 5935-01-124-9657 MPN 303190-9Electrical Receptacle Connector
- 5935-01-197-8425 MPN 46-055778-01Electrical Plug Connector
- 5905-01-357-4661 MPN 908-3047Resistor Bracket Assembly
- 5935-01-265-0236 MPN 77-081426-02Electrical Receptacle Connector
- 5950-00-518-2002 MPN 2564-11Radio Frequency Coil
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
![Mechanic Bill explains Panel Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-271-6884 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
77-081336-01 | Northrop Grumman Systems Corporation |
77-081336-01 | Northrop Grumman Systems Corporation |
Stock Check
![](/public/images/partscage_shelf3.png)