NSN 5305-01-274-8613
High Torque Screw
Between 0.845 inches and 0.875 inches fastener length, flat countersunk head style, between 0.480 inches and 0.530 inches head diameter, internal drive style: hexagon.
Manufacturer part number 94700-4F-7B for national stock number 5305012748613.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-274-8613.
-
MPN or Model
94700-4F-7B
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.240 inches -
Fastener Length
Between 0.845 inches and 0.875 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.480 inches and 0.530 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
0.162 inches -
Width Across Flats
0.156 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 45.0 rockwell c -
Countersink Angle
Between 80.0 degrees and 84.0 degrees -
Material
Stainless steel -
Surface Treatment
Oxide -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-207-1728 MPN 73573-4-23CSocket Head Cap Screw
- 5305-00-445-8743 MPN NAS1134-14Close Tolerance Screw
- 5305-00-505-3458 MPN LS15237C4-4Close Tolerance Screw
- 5305-00-505-4070 MPN LS15237-3-1Close Tolerance Screw
- 5305-00-508-6951 MPN LS15235C08-3Close Tolerance Screw
- 5305-00-522-9479 MPN HT4024L6-6Close Tolerance Screw
- 5305-00-903-6749 MPN 3001T93P01Machine Screw
- 5305-00-913-7969 MPN NAS1101C3-5Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-274-8613 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
94700-4F-7B | Sps Technologies, Llc |
16990-4F-7B | Sps Technologies, Llc |