NSN 5305-01-275-0515
High Torque Screw
Between 0.826 inches and 0.856 inches fastener length, flat countersunk head style, between 0.350 inches and 0.399 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number C7985-4D7 for national stock number 5305012750515.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-275-0515.
-
MPN or Model
C7985-4D7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.378 inches and 0.428 inches -
Fastener Length
Between 0.826 inches and 0.856 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.350 inches and 0.399 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.666 inches first hole and 0.696 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-321-9139 MPN AIC822-06-5Socket Head Cap Screw
- 5305-00-487-5275 MPN AIC1023H5-13Close Tolerance Screw
- 5305-00-538-7818 MPN BACB30LU4-8Close Tolerance Screw
- 5305-01-303-6352 MPN AIC939-3-6PClose Tolerance Screw
- 5305-01-312-8061 MPN 3M963-4L6Close Tolerance Screw
- 5305-01-330-2552 MPN AIC4414-3-10Machine Screw
- 5305-01-435-6313 MPN BACB30LU9-21Close Tolerance Screw
- 5305-01-471-9963 MPN 120-225C3-10Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-275-0515 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C7985-4D7 | Lockheed Martin Corporation |
VT1694-4-D7 | Alcoa Global Fasteners, Inc. |
H185-4-D7 | Huck International, Inc. |
AIC985-4-D7 | Sps Technologies, Llc |
VT1694-4-D7 | Arconic Global Fasteners & Rings, |
PBF1166-4-D7 | Sps Technologies, Llc |
121558-4-AD7 | Sps Technologies, Llc |
H185-4-D7 | Huck Intl Inc |