NSN 5305-01-277-6228
High Torque Screw
Between 0.910 inches and 0.940 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number AIC985B3-9 for national stock number 5305012776228.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-277-6228.
-
MPN or Model
AIC985B3-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 0.910 inches and 0.940 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Features Provided
Dry film lubricant -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Aluminum and chromate -
Surface Treatment Specification
Mil-c-83488 type 2 cl 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-143-1952 MPN A1C84-4-6Machine Screw
- 5305-00-316-7778 MPN AIC812-06-9Machine Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-058-5342 MPN NAS1101-06-17Machine Screw
- 5305-01-074-2077 MPN AIC811-06-16Socket Head Cap Screw
- 5305-01-101-4816 MPN NAS1101E04-12Machine Screw
- 5305-01-351-3521 MPN AIC1515-4-6Close Tolerance Screw
- 5305-01-381-2172 MPN 1701-3-13Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-277-6228 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC985B3-9 | Sps Technologies, Llc |
C7985B3-9 | Lockheed Martin Corporation |
H185B3-9 | Huck International, Inc. |
C7985B3-9 | Sps Technologies, Llc |
VT1694W3-9 | Arconic Global Fasteners & Rings, |
PBF1166B3-9 | Sps Technologies, Llc |
VT1694W3-9 | Alcoa Global Fasteners, Inc. |
121558-3-A7B | Sps Technologies, Llc |
H185B3-9 | Huck Intl Inc |