NSN 5305-01-279-6767
High Torque Screw
Between 0.985 inches and 1.015 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: 0.311 inches .
Manufacturer part number NAS1155V10D for national stock number 5305012796767.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-279-6767.
-
MPN or Model
NAS1155V10D
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
Between 0.985 inches and 1.015 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
0.311 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.871 inches first hole and 0.881 inches first hole -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4967 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1155 professional/industrial association standard
More from these suppliers
- 5940-01-548-8992 MPN NAS24-3KLug Terminal
- 5940-01-451-4891 MPN NAS1063A10-105BWTerminal Board Marker Strip
- 5305-00-057-0500 MPN MS51958-4Machine Screw
- 5305-00-057-1720 MPN NAS1101-06-7Machine Screw
- 5305-00-121-2342 MPN MS27039C1-29Machine Screw
- 5305-00-156-1977 MPN NAS1100E3-8Machine Screw
- 5305-00-186-9234 MPN NAS1352-02LL4PSocket Head Cap Screw
- 5305-00-197-6222 MPN NAS1102-04-5BMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-279-6767 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1155V10D | National Aerospace Standards |