NSN 5305-01-283-0787
Bolt Stove
Between 1.094 inches and 1.125 inches fastener length, flat countersunk head style, between 0.447 inches and 0.507 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number MS24694-104 for national stock number 5305012830787.
Datasheet
-
Product description
Machine Screw NSN 5305-01-283-0787.
-
MPN or Model
MS24694-104
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.469 inches and 0.500 inches -
Fastener Length
Between 1.094 inches and 1.125 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.447 inches and 0.507 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
Between 26.0 rockwell c and 32.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 8740 or steel comp 8630 -
Screw Material Specification
Mil-s-6049, uns g8740 military specification 1st material response or mils-6040, uns g8630 military specification 2nd material response -
Supplementary Features
No surf. Fin. Plating; aircraft struct appl -
Thread Series Designator
Unf -
Specification Data
96906-ms24694 government standard
More from these suppliers
- 5935-01-110-7028 MPN NAS1653R22B41SNElectrical Plug Connector
- 5940-01-314-4635 MPN NAS1387-5Conductor Splice
- 5940-01-425-6527 MPN NAS1063A20-456Terminal Board Marker Strip
- 5940-01-447-9983 MPN NAS1063B186-198Terminal Board Marker Strip
- 5935-01-479-7268 MPN NAS1712D6-11NElectrical Connector Cable Clamp
- 1680-01-517-0727 MPN NAS1336A5C10DAircr Swing Arm Pin
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5305-00-005-0657 MPN NAS1154E21Close Tolerance Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-283-0787 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS24694-104 | National Aerospace Standards |
MS24694-104 | Military Standards |