NSN 5305-01-283-9899
High Torque Screw
Three keyways 1.371 inch min. And 1.391 inch max. Long and 0.040 inch min. And 0.044 inch max. Wide; hole at threaded end with dia. Reamed to accept plug.
Manufacturer part number CA21017-4-14 for national stock number 5305012839899.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-283-9899.
-
MPN or Model
CA21017-4-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.516 inches and 0.556 inches -
Fastener Length
Between 1.401 inches and 1.421 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.140 inches and 0.150 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Width Across Flats
Between 0.1565 inches and 0.1587 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-061-9136 MPN CA2730-4-19Socket Head Cap Screw
- 5305-01-052-1188 MPN CA2658-4-79Close Tolerance Screw
- 5305-01-114-9588 MPN CA13170-08-3-11PPMachine Screw
- 5305-01-382-9722 MPN CA2230-10-8-12Setscrew
- 5305-01-488-7505 MPN CA2292-10-9-10Panel Screw Assembly
- 5306-00-307-4175 MPN CA4150-5-43Close Tolerance Bolt
- 5306-01-398-9476 MPN SS27576-3-16Shear Bolt
- 1560-00-117-2465 MPN 55-18001Wing Flap Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-283-9899 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA21017-4-14 | Arconic Global Fasteners & Rings, |
LE111-0001-4014 | Boeing Company, The |
FIT01-0001-4014 | Fastener Innovation Technology, Inc. |
LE111-0001-4014 | Fastener Innovation Technology, Inc. |