NSN 5305-01-284-3338
Bolt Stove
Between 0.281 inches and 0.312 inches fastener length, flat countersunk head style, between 0.126 inches and 0.172 inches head diameter, internal drive style: torque set.
Manufacturer part number NAS1102C02-5 for national stock number 5305012843338.
Datasheet
-
Product description
Machine Screw NSN 5305-01-284-3338.
-
MPN or Model
NAS1102C02-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.245 inches and 0.276 inches -
Fastener Length
Between 0.281 inches and 0.312 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.126 inches and 0.172 inches -
Internal Drive Style
Torque set -
Thread Diameter
0.086 inches -
Thready Qty Per Inch (tpi)
56 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Hardness Rating
Between 248.0 brinell standard and 341.0 brinell standard -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Iron alloy 660 -
Screw Material Specification
Asm 5732 assn standard single material response -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5940-01-384-3975 MPN NAS1063B3-3Terminal Board Marker Strip
- 5305-00-005-0631 MPN NAS1509-22Close Tolerance Screw
- 5305-00-023-5867 MPN NAS602-2Machine Screw
- 5305-00-051-0227 MPN MS24693-C272Machine Screw
- 5305-00-057-0530 MPN NASM51958Machine Screw
- 5305-00-167-3630 MPN MILS7839Machine Screw
- 5305-00-206-3694 MPN MS35198-75Machine Screw
- 5305-00-238-7400 MPN NAS1352C06-5Socket Head Cap Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-284-3338 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1102C02-5 | National Aerospace Standards |