NSN 5305-01-284-4747
High Torque Screw
Cut three equal keyways,120 degrees.
Manufacturer part number CA2194-3-07 for national stock number 5305012844747.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-284-4747.
-
MPN or Model
CA2194-3-07
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.424 inches and 0.464 inches -
Fastener Length
Between 0.872 inches and 0.892 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.264 inches and 0.303 inches -
Head Height
0.012 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.190 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Width Across Flats
Between 0.1253 inches and 0.1270 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-100-6838 MPN CA11020-06-3-7PScrew Assembly
- 5305-00-121-8885 MPN CA4520-4-13Close Tolerance Screw
- 5305-00-454-0612 MPN CA29040-3-5-8PPanel Screw Assembly
- 5305-00-478-0515 MPN CA3087-5Panel Screw Assembly
- 5305-01-097-2727 MPN 581R275H09Panel Screw Assembly
- 5305-01-381-2297 MPN CA2808C3-9PKPanel Screw Assembly
- 5975-00-074-2072 MPN LE127-0011-0001Electrical Components Tiedown Strap
- 1560-00-117-9558 MPN 88-31494-3Track Suppo Bracket
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-284-4747 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2194-3-07 | Arconic Global Fasteners & Rings, |
CA2194-3-07 | Fastener Innovation Technology, Inc. |
LE111-0003-3007 | Boeing Company, The |