NSN 5305-01-284-5761
High Torque Screw
Between 1.424 inches and 1.454 inches fastener length, pan no. 2 head style, between 0.597 inches and 0.612 inches head diameter, head height: between 0.176 inches and 0.188 inches .
Manufacturer part number NAS1578C5R15 for national stock number 5305012845761.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-284-5761.
-
MPN or Model
NAS1578C5R15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.476 inches and 0.526 inches -
Fastener Length
Between 1.424 inches and 1.454 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.597 inches and 0.612 inches -
Head Height
Between 0.176 inches and 0.188 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.312 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
63.0 microinches bearing surface of head -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5732 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1578 professional/industrial association standard
More from these suppliers
- 1680-01-547-3390 MPN NAS76A6-114PBushing Blank
- 5940-01-548-8992 MPN NAS24-3KLug Terminal
- 1680-01-417-3471 MPN NAS1103-34DWBolt Aircraft Hinge
- 5940-01-451-4001 MPN NAS1063A10-105BSTerminal Board Marker Strip
- 5305-00-003-9326 MPN NAS6002U16Machine Screw
- 5305-00-057-0534 MPN NASM51958Machine Screw
- 5305-00-059-4538 MPN MS35190-12Machine Screw
- 5305-00-104-5078 MPN NAS1352-6LE64PSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-284-5761 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578C5R15 | National Aerospace Standards |