NSN 5305-01-286-3112
High Torque Screw
Between 1.163 inches and 1.297 inches fastener length, oval countersunk head style, between 0.297 inches and 0.302 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number A175-2316 for national stock number 5305012863112.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-286-3112.
-
MPN or Model
A175-2316
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.219 inches and 0.357 inches -
Fastener Length
Between 1.163 inches and 1.297 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.297 inches and 0.302 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.940 inches and 0.944 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-079-1675 MPN 3MA335CFA6-5Machine Screw
- 5305-00-181-0935 MPN 112-0910-001Machine Screw
- 5305-00-455-0416 MPN VT1040-5-13Close Tolerance Screw
- 5305-00-505-2825 MPN LS15267V3-25Machine Screw
- 5305-00-971-7539 MPN C082-5-13Machine Screw
- 5305-01-051-0624 MPN BACS12CK3-10Machine Screw
- 5305-01-054-6267 MPN C7985-4-14Close Tolerance Screw
- 5305-01-142-4873 MPN HT4008-5-9Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-286-3112 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
A175-2316 | Huck International, Inc. |
LE111-0035-2316 | Boeing Company, The |
SC1786R-3-16 | Arconic Global Fasteners & Rings, |
PBF1381-2316 | Sps Technologies, Llc |
123179A3R16 | Sps Technologies, Llc |
A175-2316 | Huck Intl Inc |