NSN 5305-01-286-7185
High Torque Screw
Between 1.079 inches and 1.109 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT4025L3D11 for national stock number 5305012867185.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-286-7185.
-
MPN or Model
HT4025L3D11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.431 inches -
Fastener Length
Between 1.079 inches and 1.109 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.075 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.958 inches first hole and 0.998 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-417-3845 MPN 11853D3-7-5/1Close Tolerance Screw
- 5305-01-494-0560 MPN 11827C3-5AFClose Tolerance Screw
- 5305-01-512-8356 MPN 11845D3-8AFClose Tolerance Screw
- 5305-01-535-6807 MPN 11845C47AClose Tolerance Screw
- 5306-01-046-1196 MPN ST3M607-5D37Shoulder Bolt
- 5320-00-152-7338 MPN TL110-05-4Pin-rivet
- 5320-00-278-0891 MPN TL130-4-15Pin-rivet
- 5320-00-443-6014 MPN TLH100-10-26Pin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-286-7185 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4025L3D11 | Sps Technologies, Llc |
HT4025L3D11 | Alcoa Global Fasteners, Inc. |
HT4025L3D11 | Hi-shear Corporation |
HT4025L3D11 | Lisi Aerospace Canada Corp |
ST3M454-3DL11 | Boeing Company, The |
11905-3DL11 | Reid Products Inc. |
ST3M454-3DL11 | Sps Technologies, Llc |
ST3M454-3DL11 | Alcoa Global Fasteners, Inc. |
Stock Check
![](/public/images/partscage_shelf3.png)