NSN 5305-01-286-9184
High Torque Screw
Three keyways machined in body of screw 1.780 to 1.800 long,0.030 to 0.034 wide. Bore machine in threaded end to recieve plug.
Manufacturer part number CA21017-3-22 for national stock number 5305012869184.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-286-9184.
-
MPN or Model
CA21017-3-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.425 inches and 0.465 inches -
Fastener Length
Between 1.810 inches and 1.830 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.360 inches and 0.374 inches -
Head Height
Between 0.115 inches and 0.125 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.190 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Width Across Flats
Between 0.125 inches and 0.127 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-451-2528 MPN CA4322Electrical Connector Guide
- 1560-01-474-2502 MPN 40479-103Aircraft Latch Assembly
- 5305-00-021-7789 MPN CA2730-4-46Close Tolerance Screw
- 5305-01-058-7070 MPN CA2658-3-12Close Tolerance Screw
- 5305-01-143-9685 MPN CA21170-3-9Machine Screw
- 5305-01-381-2297 MPN CA2808C3-9PKPanel Screw Assembly
- 5305-01-508-8839 MPN CA2254-4-2Hexagon Head Cap Screw
- 1560-00-185-2410 MPN 58-51015Fuel G Rod Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-286-9184 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA21017-3-22 | Arconic Global Fasteners & Rings, |
LE111-0001-3022 | Fastener Innovation Technology, Inc. |
LE111-0001-3022 | Boeing Company, The |