NSN 5305-01-286-9333
High Torque Screw
Between 0.570 inches and 0.600 inches fastener length, oval countersunk undercut head style, between 0.355 inches and 0.397 inches head diameter, head height: between 0.057 inches and 0.063 inches .
Manufacturer part number LD111-0047-2403 for national stock number 5305012869333.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-286-9333.
-
MPN or Model
LD111-0047-2403
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.372 inches and 0.422 inches -
Fastener Length
Between 0.570 inches and 0.600 inches -
Head Style
Oval countersunk undercut -
Head Diameter
Between 0.355 inches and 0.397 inches -
Head Height
Between 0.057 inches and 0.063 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-155-9995 MPN 36-318117Cockpit Encl Roller
- 1560-00-185-5038 MPN 88-31493-3Fuselage Co Bracket
- 1560-00-796-0402 MPN 265-540168Trim Con Plate Assy
- 5985-01-182-6757 MPN LE413-0230-0021Waveguide Assembly
- 1560-01-191-6878 MPN L3003623-076Fairing Shoe
- 1560-01-192-1077 MPN LE261-0103-0029Aircraft Wing Fairing Inflatable Seal
- 1560-01-200-8571 MPN L3223835-011Aircraft Access Door
- 5985-01-204-2232 MPN LE413-0216-0001Waveguide
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-286-9333 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0047-2403 | Boeing Company, The |