NSN 5305-01-287-1588
High Torque Screw
Two keyways along threads 180 degrees apart; width of keyways 0.040 in. Min. To 0.050 in. Max.
Manufacturer part number CA21062-08-2-8 for national stock number 5305012871588.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-287-1588.
-
MPN or Model
CA21062-08-2-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
0.500 inches -
Head Style
Pan -
Head Diameter
Between 0.306 inches and 0.322 inches -
Head Height
Between 0.105 inches and 0.115 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Grip Length
0.062 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Steel comp 302 or steel comp 304 or steel comp 304l or steel comp 305 or steel comp 309 or steel comp 310 or steel comp 316 or steel comp 316l or steel comp 317 or steel comp 321 or steel comp 322 or steel comp 324 or steel comp 347 -
Material Specification
Qq-s-763 federal specification all material responses -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5305-00-467-0333 MPN CA3069-14SScrew 8ssembly
- 5305-01-064-4062 MPN CA2653-6-10Close Tolerance Screw
- 5305-01-079-6570 MPN CA2440-3-10PPanel Screw Assembly
- 5305-01-140-6361 MPN CA21062-10-3-9Close Tolerance Screw
- 5305-01-180-6615 MPN CA28096-3B-7SPanel Screw Assembly
- 5305-01-381-2297 MPN CA2808C3-9PKPanel Screw Assembly
- 5305-01-420-7643 MPN CA28106C06-6HSPanel Screw Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-287-1588 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA21062-08-2-8 | Arconic Global Fasteners & Rings, |