NSN 5305-01-287-5784
High Torque Screw
Between 0.573 inches and 0.603 inches fastener length, flat countersunk head style, between 0.297 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1993C4T for national stock number 5305012875784.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-287-5784.
-
MPN or Model
NAS1993C4T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Direction
Right-hand -
Thread Length
Between 0.313 inches and 0.363 inches -
Fastener Length
Between 0.573 inches and 0.603 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.297 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1993 professional/industrial association standard
More from these suppliers
- 5940-00-872-0888 MPN NAS1745-3Conductor Splice
- 5935-01-323-4639 MPN MS33684-18-10PElectrical Connector Insert
- 5940-01-660-0086 MPN NAS1063Terminal Board Marker Strip
- 5940-01-660-0092 MPN NAS1063Terminal Board Marker Strip
- 5925-01-604-6597 MPN MS3320-5VCircuit Breaker
- 5305-00-004-5183 MPN NAS1102-06-40Machine Screw
- 5305-00-060-9744 MPN MS24693-C287Machine Screw
- 5305-00-139-6754 MPN MS3213-7Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-287-5784 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1993C4T | National Aerospace Standards |
Stock Check
- NE: 6572
- NS: 130