NSN 5305-01-287-6287
High Torque Screw
Between 1.007 inches and 1.037 inches fastener length, oval countersunk undercut head style, between 0.355 inches and 0.397 inches head diameter, head height: between 0.095 inches and 0.101 inches .
Manufacturer part number LD111-0047-2410 for national stock number 5305012876287.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-287-6287.
-
MPN or Model
LD111-0047-2410
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.372 inches and 0.422 inches -
Fastener Length
Between 1.007 inches and 1.037 inches -
Head Style
Oval countersunk undercut -
Head Diameter
Between 0.355 inches and 0.397 inches -
Head Height
Between 0.095 inches and 0.101 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.250 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-092-5045 MPN 202-54709Take Off Indicator Light Swi Cam
- 1560-00-121-4861 MPN 19-52407-1Rudder Peda Support
- 1560-00-570-4589 MPN 202-14109-2Aircraft Leading Edge
- 1560-00-651-6262 MPN 191-48274Fuel T Cap Assembly
- 5930-00-771-1475 MPN 243-530104Switch Guard
- 1680-00-796-8988 MPN 265-540308Power Control Panel
- 1560-00-960-0831 MPN 277-533343Duct Assembly
- 4920-01-146-4908 MPN 41A53000-001Pneumatic System Components Test Set
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-287-6287 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0047-2410 | Boeing Company, The |
ST0160LB0009 | Boeing Company, The |