NSN 5305-01-288-1420
High Torque Screw
Between 1.371 inches and 1.401 inches fastener length, flat countersunk head style, between 0.615 inches and 0.898 inches head diameter, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number 121754-7-11 for national stock number 5305012881420.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-288-1420.
-
MPN or Model
121754-7-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.673 inches and 0.723 inches -
Fastener Length
Between 1.371 inches and 1.401 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.615 inches and 0.898 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
Aircraft, f-16 -
Thread Diameter
0.438 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-005-8297 MPN 51B332-6Close Tolerance Screw
- 5305-00-308-1549 MPN AIC811-04-9Socket Head Cap Screw
- 5305-00-461-5596 MPN AIC1023H10-20Close Tolerance Screw
- 5305-00-501-9640 MPN LS15265V3-1Close Tolerance Screw
- 5305-00-840-5962 MPN A1C617-1Externally Relieved Body Screw
- 5305-01-003-5925 MPN AIC1184-302Close Tolerance Screw
- 5305-01-097-8213 MPN AIC1023H10-10Close Tolerance Screw
- 5305-01-242-7415 MPN AIC485-52Externally Relieved Body Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-288-1420 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121754-7-11 | Sps Technologies, Llc |
VT1696-7-11 | Arconic Global Fasteners & Rings, |
PBF1198-7-11 | Sps Technologies, Llc |
121754-7-11 | Sps Technologies, Llc |
AIC9535-7-11 | Sps Technologies, Llc |
VT1696-7-11 | Alcoa Global Fasteners, Inc. |
C9535-7-11 | Lockheed Martin Corporation |
SC1776-7-11 | Arconic Global Fasteners & Rings, |
SF120-7-11 | Saturn Fasteners Inc |
C9535-7-11 | Pilgrim Screw Corporation |