NSN 5305-01-288-5723
High Torque Screw
Between 2.270 inches and 2.320 inches fastener length, flush head style, between 0.615 inches and 0.898 inches head diameter, head height: 0.195 inches .
Manufacturer part number PBF1198-7-26 for national stock number 5305012885723.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-288-5723.
-
MPN or Model
PBF1198-7-26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.668 inches and 0.698 inches -
Fastener Length
Between 2.270 inches and 2.320 inches -
Head Style
Flush -
Head Diameter
Between 0.615 inches and 0.898 inches -
Head Height
0.195 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 1.602 inches and 1.622 inches -
Thready Qty Per Inch (tpi)
20 -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-6218 MPN AIC617-23Externally Relieved Body Screw
- 5305-00-456-2477 MPN NAS1101C04H16Machine Screw
- 5305-01-027-4661 MPN HT4020-4-8AClose Tolerance Screw
- 5305-01-126-4721 MPN HT4049-7D49Close Tolerance Screw
- 5305-01-172-8791 MPN AIC6927-4-9Machine Screw
- 5305-01-268-5562 MPN AIC985-3D-5Close Tolerance Screw
- 5305-01-303-5636 MPN AIC939-3-14Close Tolerance Screw
- 5305-01-313-9327 MPN GS551C3-554Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-288-5723 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1198-7-26 | Sps Technologies, Llc |
AIC9535-7-26 | Sps Technologies, Llc |
C9535-7-26 | Lockheed Martin Corporation |
VT1696-7-26 | Arconic Global Fasteners & Rings, |
C9535-7-26 | Sps Technologies, Llc |
C9535-7-26 | Sps Technologies, Llc |
SC1776-7-26 | Arconic Global Fasteners & Rings, |
121754-7-26 | Sps Technologies, Llc |
VT1696-7-26 | Alcoa Global Fasteners, Inc. |