NSN 5305-01-288-6578
High Torque Screw
Between 2.382 inches and 2.412 inches fastener length, flat countersunk head style, between 0.525 inches and 0.770 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number AIC9535-6-29 for national stock number 5305012886578.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-288-6578.
-
MPN or Model
AIC9535-6-29
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.560 inches and 0.610 inches -
Fastener Length
Between 2.382 inches and 2.412 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.525 inches and 0.770 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 1.802 inches and 1.822 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-316-8124 MPN NAS1101E04H6Machine Screw
- 5305-01-054-2535 MPN BACB30LK06-4Close Tolerance Screw
- 5305-01-069-2728 MPN NAS1101E3-12Machine Screw
- 5305-01-130-4242 MPN AIC812-3-23Machine Screw
- 5305-01-335-6017 MPN AIC985-3D-8Machine Screw
- 5305-01-409-1635 MPN AIC800983-1Socket Head Cap Screw
- 5305-01-512-8411 MPN TX1027D3-5AFClose Tolerance Screw
- 5306-00-031-0925 MPN EWB26-8H14Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-288-6578 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC9535-6-29 | Sps Technologies, Llc |
VT1696-6-29 | Arconic Global Fasteners & Rings, |
PBF1198-6-29 | Sps Technologies, Llc |
121754-6-29 | Sps Technologies, Llc |
121754-6-29 | Sps Technologies, Llc |
C9535-6-29 | Lockheed Martin Corporation |
VT1696-6-29 | Alcoa Global Fasteners, Inc. |
SC1776-6-29 | Arconic Global Fasteners & Rings, |
Stock Check
![](/public/images/partscage_shelf3.png)