NSN 5305-01-288-9361
Tap Bolt
Between 3.400 inches and 3.500 inches fastener length, hexagon head style, between 0.455 inches and 0.483 inches head height, width between flats: between 1.100 inches and 1.125 inches .
Manufacturer part number 9425565 for national stock number 5305012889361.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-01-288-9361.
-
MPN or Model
9425565
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.5 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.750 inches -
Fastener Length
Between 3.400 inches and 3.500 inches -
Head Style
Hexagon -
Head Height
Between 0.455 inches and 0.483 inches -
Width Between Flats
Between 1.100 inches and 1.125 inches -
Thread Diameter
0.750 inches -
Thready Qty Per Inch (tpi)
10 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Hardness Rating
33.0 rockwell c and 39.0 rockwell c -
Minimum Yield Strength
130000 pounds per square inch -
Material
Steel -
Material Specification
Sae j429 gr8 assn standard single material response -
Surface Treatment
Phosphate -
Surface Treatment Specification
Gm 4435-m code a cagec 24617 mfr ref single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 4920-00-707-4623 MPN 6796783Curvic Co Protector
- 4920-00-707-4597 MPN T27289Holding Fixture
- 5305-00-022-2622 MPN 222622Hexagon Head Cap Screw
- 5305-00-276-8234 MPN 1878419Setscrew
- 5305-00-984-4686 MPN 8599621-312Hexagon Head Cap Screw
- 5305-01-159-2781 MPN 11500999Assembled Washer Screw
- 5305-01-200-7735 MPN 1150817Tapping Screw
- 5305-01-381-2296 MPN 9421705Socket Head Cap Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-01-288-9361 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
9425565 | General Motors Corp |