NSN 5305-01-290-7453
High Torque Screw
Between 1.707 inches and 1.757 inches fastener length, flush head style, between 0.700 inches and 1.024 inches head diameter, head height: 0.222 inches .
Manufacturer part number VT1696-8-15 for national stock number 5305012907453.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-290-7453.
-
MPN or Model
VT1696-8-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.779 inches and 0.809 inches -
Fastener Length
Between 1.707 inches and 1.757 inches -
Head Style
Flush -
Head Diameter
Between 0.700 inches and 1.024 inches -
Head Height
0.222 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.500 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
20 -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-364-9541 MPN HT4025L3-24Close Tolerance Screw
- 5305-00-419-0861 MPN NAS1101-6-10WMachine Screw
- 5305-00-840-5962 MPN A1C617-1Externally Relieved Body Screw
- 5305-01-050-9001 MPN AIC984-3-9PClose Tolerance Screw
- 5305-01-050-9001 MPN AIC984-3-9Close Tolerance Screw
- 5305-01-054-6291 MPN AIC984-4-8Close Tolerance Screw
- 5305-01-217-2925 MPN BACB30LU4-7XShoulder Screw
- 5305-01-329-9959 MPN AIC4463-3-6Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-290-7453 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VT1696-8-15 | Arconic Global Fasteners & Rings, |
AIC9535-8-15 | Sps Technologies, Llc |
121754-8-15 | Sps Technologies, Llc |
VT1696-8-15 | Alcoa Global Fasteners, Inc. |
C9535-8-15 | Lockheed Martin Corporation |
PBF1198-8-15 | Sps Technologies, Llc |
SC1776-8-15 | Arconic Global Fasteners & Rings, |
C9535-8-15 | Sps Technologies, Llc |
C9535-8-15 | Sps Technologies, Llc |