NSN 5305-01-291-8877
High Torque Screw
Between 2.168 inches and 2.198 inches fastener length, flat countersunk head style, between 0.615 inches and 0.898 inches head diameter, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number AIC9535-7-24 for national stock number 5305012918877.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-291-8877.
-
MPN or Model
AIC9535-7-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.658 inches and 0.708 inches -
Fastener Length
Between 2.168 inches and 2.198 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.615 inches and 0.898 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2964 MPN LS15264V04-10Machine Screw
- 5305-00-809-1738 MPN 51B333-18Close Tolerance Screw
- 5305-00-939-3420 MPN 504578Machine Screw
- 5305-01-021-1510 MPN AIC811-08-22Socket Head Cap Screw
- 5305-01-053-5801 MPN AIC9535-6-14Close Tolerance Screw
- 5305-01-138-2658 MPN AIC940-4-9Machine Screw
- 5305-01-207-1688 MPN AIC4037-06-08RMachine Screw
- 5305-01-365-0409 MPN BACB30LR6-43Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-291-8877 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC9535-7-24 | Sps Technologies, Llc |
C9535-7-24 | Lockheed Martin Corporation |
VT1696-7-24 | Arconic Global Fasteners & Rings, |
121754-7-24 | Sps Technologies, Llc |
PBF1198-7-24 | Sps Technologies, Llc |
VT1696-7-24 | Alcoa Global Fasteners, Inc. |
121754-7-24 | Sps Technologies, Llc |
SC1776-7-24 | Arconic Global Fasteners & Rings, |
C9535-7-24 | Sps Technologies, Llc |