NSN 5305-01-293-6118
High Torque Screw
Between 1.007 inches and 1.037 inches fastener length, flat countersunk head style, between 0.350 inches and 0.399 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number HR215JR-4-10 for national stock number 5305012936118.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-293-6118.
-
MPN or Model
HR215JR-4-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.372 inches and 0.422 inches -
Fastener Length
Between 1.007 inches and 1.037 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.350 inches and 0.399 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.250 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4820-00-010-6019 MPN MILV22549G1-2 400-33T055SBUSafety Relief Valve
- 4820-00-054-3788 MPN 2640-825X60ASSYRAL1Ball Valve
- 4820-00-926-4214 MPN 2620-902ASSYCL1Globe Valve
- 4820-01-043-6787 MPN 79RB40200000L1Valve Disk
- 5935-01-046-3755 MPN M24231/14-004L1Electrical Plug Connector
- 4820-01-086-4047 MPN 810-2177934-B11Globe Valve
- 4820-01-102-1132 MPN VV91-XXX-04L1Check Valve
- 4820-01-104-1642 MPN 24-49206CPCartridge Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-293-6118 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HR215JR-4-10 | Hi-shear Corporation |
HR215JR-4-10 | Lisi Aerospace Canada Corp |
SCD1828-4-10 | Arconic Global Fasteners & Rings, |
PBF1320-4-10 | Sps Technologies, Llc |
122773-4-10 | Sps Technologies, Llc |
GB510CW4-10 | Northrop Grumman Systems Corporation |
HR215JR-4-10 | Naval Inventory Control Point |
HR215JR-4-10 | Hi-shear Corporation |