NSN 5305-01-295-1069
High Torque Screw
Between 2.348 inches and 2.378 inches fastener length, flat countersunk head style, between 0.880 inches and 0.890 inches head diameter, grip diameter: between 0.4365 inches and 0.4370 inches .
Manufacturer part number HT4025L7-27 for national stock number 5305012951069.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-295-1069.
-
MPN or Model
HT4025L7-27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.650 inches and 0.700 inches -
Fastener Length
Between 2.348 inches and 2.378 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.880 inches and 0.890 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.438 inches -
Grip Length
Between 1.678 inches and 1.698 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-395-3391 MPN HT4027-5-10Close Tolerance Screw
- 5305-00-459-0885 MPN SC1711-3-9Machine Screw
- 5305-01-045-2902 MPN BACB30LU5-23Close Tolerance Screw
- 5305-01-046-0721 MPN HT4009-4-5Shoulder Screw
- 5305-01-056-4220 MPN C7986-10-52Close Tolerance Screw
- 5305-01-076-4946 MPN SC1810-4-4Close Tolerance Screw
- 5305-01-106-2356 MPN HT4068-6-25AClose Tolerance Screw
- 5305-01-142-7198 MPN HT4049-4-9YShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-295-1069 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4025L7-27 | Huck International, Inc. |
HT4025L7-27 | Arconic Global Fasteners & Rings, |
HT4025L7-27 | Hi-shear Corporation |
HT4025L7-27 | Lisi Aerospace Canada Corp |
ST3M454-7L27 | Boeing Company, The |
11905-7L27 | Reid Products Inc. |
HT4025L7-27 | Sps Technologies, Llc |
HT4025L7-27 | Huck Intl Inc |
10113658 | Nimikkeistokeskus Ncb Finland |
HT4025L7-27 | Alcoa Global Fasteners, Inc. |