NSN 5305-01-297-2495
High Torque Screw
Between 1.605 inches and 1.635 inches fastener length, pan no. 2 head style, between 0.456 inches and 0.508 inches head diameter, head height: 0.111 inches .
Manufacturer part number NAS4604-20 for national stock number 5305012972495.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-297-2495.
-
MPN or Model
NAS4604-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
Between 1.605 inches and 1.635 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.456 inches and 0.508 inches -
Head Height
0.111 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.250 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 3140 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification 1st treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas4604 professional/industrial association standard
More from these suppliers
- 5940-00-159-0252 MPN 706S3Stud Terminal
- 5940-01-354-9983 MPN NAS1063A3-1004Terminal Board Marker Strip
- 5940-01-413-3016 MPN NAS1063B38-54Terminal Board Marker Strip
- 1680-01-541-9615 MPN NAS312C26-1192Control Cable Assembly
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5935-01-443-8103 MPN NAS1692G10T5PNElectrical Receptacle Connector
- 5940-01-666-5991 MPN NAS1063A2-536KTerminal Board Marker Strip
- 5305-00-060-4372 MPN NAS1633-16Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-297-2495 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS4604-20 | National Aerospace Standards |