NSN 5305-01-297-7179
High Torque Screw
Between 0.650 inches and 0.690 inches fastener length, flat countersunk head style, 0.3813 inches head diameter, grip diameter: between 0.2202 inches and 0.2207 inches .
Manufacturer part number NAS1580A3T5Y for national stock number 5305012977179.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-297-7179.
-
MPN or Model
NAS1580A3T5Y
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 0.650 inches and 0.690 inches -
Head Style
Flat countersunk -
Head Diameter
0.3813 inches -
Grip Diameter
Between 0.2202 inches and 0.2207 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.1900 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-00-801-2454 MPN NAS707G2Stud Terminal
- 5940-00-833-5836 MPN NAS1063A20-21Terminal Board Marker Strip
- 5940-01-470-3343 MPN NAS1063A6-510BETerminal Board Marker Strip
- 5935-00-111-1890 MPN NAS1665-10Electrical Connector Backshell
- 5305-00-004-5099 MPN NAS662C2LLR16Socket Head Cap Screw
- 5305-00-007-1558 MPN NAS1100E04-14PMachine Screw
- 5305-00-007-6198 MPN NAS1631E26PMachine Screw
- 5305-00-051-4484 MPN MS51973-9Setscrew
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-297-7179 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A3T5Y | National Aerospace Standards |