NSN 5305-01-298-2442
High Torque Screw
Between 0.808 inches and 0.838 inches fastener length, flat countersunk head style, between 0.325 inches and 0.385 inches head diameter, grip diameter: between 0.2041 inches and 0.2051 inches .
Manufacturer part number AIC984-3-8R for national stock number 5305012982442.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-298-2442.
-
MPN or Model
AIC984-3-8R
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.808 inches and 0.838 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.325 inches and 0.385 inches -
Grip Diameter
Between 0.2041 inches and 0.2051 inches -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.485 inches and 0.515 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams-6487 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-025-4069 MPN 51B600C06-14BMachine Screw
- 5305-00-450-4086 MPN AIC1023V4-8Close Tolerance Screw
- 5305-00-505-3006 MPN LS15264V06-10Machine Screw
- 5305-00-880-1445 MPN NAS1101-08-8Machine Screw
- 5305-00-929-4069 MPN A1C792-3-3Machine Screw
- 5305-01-027-2006 MPN HT4020-4-10AClose Tolerance Screw
- 5305-01-169-0014 MPN LD111-0047-2306Close Tolerance Screw
- 5305-01-492-0203 MPN AIC 1645-4-4CClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-298-2442 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC984-3-8R | Sps Technologies, Llc |
VT16933-8R | Arconic Global Fasteners & Rings, |
HO443-8R | Huck International, Inc. |
PBF11653-8R | Sps Technologies, Llc |
121557-3-A8R | Sps Technologies, Llc |
121557-3-A8R | Sps Technologies, Llc |
VT16933-8R | Alcoa Global Fasteners, Inc. |
C7984-3-8R | Lockheed Martin Corporation |
Stock Check
- NS: 6
- NE: 53