NSN 5305-01-303-7407
High Torque Screw
Between 0.449 inches and 0.479 inches fastener length, pan head style, between 0.289 inches and 0.322 inches head diameter, head height: between 0.105 inches and 0.115 inches .
Manufacturer part number NAS1132E3P for national stock number 5305013037407.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-303-7407.
-
MPN or Model
NAS1132E3P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.449 inches and 0.479 inches -
Head Style
Pan -
Head Diameter
Between 0.289 inches and 0.322 inches -
Head Height
Between 0.105 inches and 0.115 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
0.187 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Hardness Rating
248.0 brinell standard and 321.0 brinell standard -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjc -
Specification Data
80205-nas1132 professional/industrial association standard
More from these suppliers
- 5940-01-343-1446 MPN NAS1063B-1-12Terminal Board Marker Strip
- 5305-00-004-5184 MPN NAS1102-3-36Machine Screw
- 5305-00-007-6179 MPN NAS1100C04-9Machine Screw
- 5305-00-059-7042 MPN NAS498Close Tolerance Screw
- 5305-00-071-1778 MPN MS90725-125Hexagon Head Cap Screw
- 5305-00-082-6739 MPN MS51959-111Machine Screw
- 5305-00-253-5624 MPN MS21318-43Drive Screw
- 5305-00-282-3266 MPN NAS335PA12-5Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-303-7407 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1132E3P | National Aerospace Standards |
NAS1132E3P | National Aerospace Standards |
NAS1132E3P | National Aerospace Standards |
NAS1132E3P | National Aerospace Standards |