NSN 5305-01-303-7410
High Torque Screw
Between 1.073 inches and 1.103 inches fastener length, pan head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number NAS1133E13P for national stock number 5305013037410.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-303-7410.
-
MPN or Model
NAS1133E13P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 1.073 inches and 1.103 inches -
Head Style
Pan -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5737 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf -
Specification Data
80205-nas1133 professional/industrial association standard
More from these suppliers
- 5940-01-348-5473 MPN NAS1063C12-3Terminal Board
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
- 5935-01-660-8063 MPN ES931VTElectrical Receptacle Connector
- 5305-00-007-0282 MPN NAS1100E08-12PMachine Screw
- 5305-00-068-7046 MPN MS24694A7Machine Screw
- 5305-00-099-7659 MPN NAS1221-08E3Machine Screw
- 5305-00-150-3331 MPN NAS1153V34Close Tolerance Screw
- 5305-00-186-9211 MPN NAS1704-26Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-303-7410 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1133E13P | National Aerospace Standards |
NAS1133E13P | National Aerospace Standards |
NAS1133E13P | National Aerospace Standards |
NAS1133E13P | National Aerospace Standards |